Browsed by
Tag: Mud agitator

Suitable mud agitators
Mud Agitator Technical Questions ?>

Mud Agitator Technical Questions

Comments 0 Comment

Mud Agitator Main Configuration? Electrical motor, agitator gearbox, coupler, shaft, and impeller. The worm gear is the most popular used gear for a cost-effective but larger footprint. The bevel helical reduction box holds a better working performance and smaller footprint but higher cost which is the reason for not popular. The coupler is not a necessary part but a coupler-type agitator is better to protect the motor and gearbox. Their different configuration on the main structure caters to clients’ preference….

Read More Read More

Share
Oilfield Mud Agitator Supplier ?>

Oilfield Mud Agitator Supplier

Comments 0 Comment

Oilfield mud agitator is well used on mud tank installation for tank agitating. AIPU is one of the famous agitator suppliers in the world for different options like vertical installation or horizontal installation, worm gear or bevel gear, with coupler or without, single impeller or double. The agitator is combined with electrical motor, gear box, coupler, shaft, impeller and a pubic skid. Oilfield mud agitator is typically use flame proof motors and control panel which is higher standard for electricals…

Read More Read More

Share
Mud Agitator Ready Delivery to HDD Drill Site ?>

Mud Agitator Ready Delivery to HDD Drill Site

Comments 0 Comment

Mud agitator is a necessary equipment for drilling mud agitating in mud tank to stop solids build up at tank bottom and tank corner. AIPU built 10 sets of mud agitator for 5 sets mud recycling system installation. The HDD drill site mud recycling system normally 1 tank design or with another tank for mud mixing, each rig require 2 or 3 agitator depending on tank size. AIPU finished agitator packing job yesterday and delivery to sea port today to…

Read More Read More

Share
Mud Agitator Options for Mud Tank ?>

Mud Agitator Options for Mud Tank

Comments 0 Comment

Mud agitator is a very important to mix mud inside of tank to avoid solids build up in tank corner. There are different types of agitator depending on motor installation type, gear box type and jobsite footprint space. There is worm gear, bevel gear, horizontal installation and vertical installation for options. The agitators will be required for all mud storage tank, 24 hours working is essential because solids built in tank will be very hard to remove if without agitator….

Read More Read More

Share
Bevel Type Mud Agitator ?>

Bevel Type Mud Agitator

Comments 0 Comment

Bevel type mud agitator is an ideal type of agitator to maximum it’s torque and agitating performance by a same size motor compares worm type mud agitator. Worm type agitator is well used in drilling solids control system because of cost effective, but bevel type agitator is better performance and minimum footprint space. So many client will prefer bevel type gear box instead of worm type because of it’s advantages bellowing. Features of Bevel Type Mud Agitator Bevel type gear…

Read More Read More

Share