Browsed by
Author: Eric

mud cleaner ?>

mud cleaner

Mud Cleaner is the second stage and the third stage is solids control equipment which is a combination of a Desander, Desilter, and underflow shale shaker. Compared with traditional separate Desander and Desilter, the mud cleaner has a higher cleaning function. The Underflow Screen equals another shale shaker that receives the waste from the cyclone nozzle for additional processing. So that mud cleaners could recover more valuable drilling mud. Mud cleaner is the ideal device for second and third-class solid…

Read More Read More

Share
Brief of mud cleaner ?>

Brief of mud cleaner

Because the mud would be too thick for the cleaner to deal with, the first step in utilizing one is to put it through a hydrocyclone. A hydrocyclone is a device that employs force to propel cleansed mud through the cyclone’s top segment while thicker particles flow through the bottom section. Whatever passes through the bottom part is then collected by the mud cleaner. While a hydrocyclone can help to isolate mud to some extent, the mud cleaner is responsible…

Read More Read More

Share
Frequently asked questions regarding RP13C ?>

Frequently asked questions regarding RP13C

1. What is the D100? a. The D100 cut point of a screen is the particle size at which no particles will pass through the screen. b. D100 is a single number determined from a prescribed laboratory procedure the results of the procedure should yield the same value for any given screen. c. The D100should not be compared in any way to the D100 value used in RP13E. d. The method used in RP13C provides only the D100 value with…

Read More Read More

Share
Pile desanding plant at Aipu Solids Control ?>

Pile desanding plant at Aipu Solids Control

Pile desanding plant is an integrative unit to process the slurry used during piling. What is the details of Desanding plant? Find more below Desanding plant summary We make desanding plant mainly including tank, double deck shaker, desander cones, pumps. While, for different clients there might be also desilter cones, centrifuge, filter press, etc. Such desanding plant is different with common solids control or slurry separation system. It requests high flow rate at high efficiency. For example, capacity is 250m³/h…

Read More Read More

Share
Why don’t we make solids control system stock? ?>

Why don’t we make solids control system stock?

Solids control system for different drilling requests specific configuration, especially for oil and gas drilling. Main information about solids control Solids control is the way to process drilling fluids. It is usually physical way. We separate the drilling cuttings or harmful particles by filtration. Main equipment for solids control including shale shaker, hydrocyclone separator, decanter centrifuge. For oil and gas drilling mud process, the fluids process system varies since mud flow rate. Besides mud volume of whole system, the job…

Read More Read More

Share