(YZ) slurry pump info

YZ Submersible slurry pump is with structure of vertical single stage and single suction system overhung centrifugal pump, it is made of abrasion-resistant alloy, it can convey medium with high concentration particle. There is no bearing and Gland Seal between impeller and pump body, so the slurry pump is maintenance-free and high temperature resistance, the slurry pump is the ideal centrifugal pump for oilfield drilling industry.

YZ(S) Slurry Pump Parameter

Model	Capacity		Head(m)	Speed(rpm)	Efficiency(%)	Motor(KW)
	m3/h	l/s
50YZ20-18	20	5.6	18	1430	42	3
50YZ25-12	30	8.3	11	1430	38.2	3
50YZ50-20	40	11	22	1440	41	7.5
65YZ50-12	50	13.8	12	1440	55.9	5.5
80YZ80-20	80	22.2	21	1460	55	11
80YZ80-20A	90	25	15.6	1460	51	11
100YZ100-30A	110	30.6	24	1470	54	18.5
100YZ100-30	120	33.3	28	1470	56	22
100YZ160-38	160	44.4	39	1480	52	45
150YZ250-40B	200	55.6	25	1480	49	37
150YZ250-40A	240	66.7	31	1480	50	45

YZ Submersible slurry pump structure

YZ Slurry Pump is the cantilever pump structure of single stage and single suction, with the bearing housing, supporting, intermediate pipe connecting the pump hydraulic components, the water is discharged out from the drain pipe parts, pump impeller is for semi-shrouded with the agitating vane on the vane extended, the main characteristic of this pump is the underwater pump shaft parts have enough rigidity, the impeller and pump shell have no bearings, no shaft seal, which can transport the greater medium of solid particles.

The length of inserting the water by slurry pump is between 800 and 2000, the suction pipe can be matched in case of need. The shaft seal runs into the underwater pump without setting up the shaft seal, drive should be installed the vertical motor on the supporting seat connecting with coupling and pump.

If you are interested please feel free to contact Aipu solids control for more information.