Browsed by
Tag: Mud cleaner

Mud cleaner
Some preparations before using mud cleaner ?>

Some preparations before using mud cleaner

Comments 0 Comment

Mud cleaner is the second or third stage drilling fluids solids control equipment in drilling fluids recycling system. This oil drilling fluids cleaner will handle the solids particle after being treated by the first grade separation equipment. The barite will be recovered and cuttings which are bigger than barite will be removed. Then the cuttings in the underflow will flow into circulation mud tanks through the screens of the oilfield drilling mud conditioner when the weighted mud passes while the…

Read More Read More

Share
Mud cleaner
Mud cleaner importance in solids control system ?>

Mud cleaner importance in solids control system

Comments 0 Comment

Mud cleaner is the second stage solid control equipment used for drilling fluid circulation system, HDD, CBM and Geothermal environmental waste mud cleaning system. Working process flow of mud cleaner The weighted mud flows to the inlet head section of the desander and/or desilter entering the hydrocyclones for separation of particles. Mud leaving the underflow is further screened with fine mesh to separate larger particles allowing only barite-size particles to pass through the screen. Features, advantages and benefits High G-force…

Read More Read More

Share
Mud cleaner
A brief introduction for mud cleaner ?>

A brief introduction for mud cleaner

Comments 0 Comment

Mud cleaner info Mud cleaner is the drilling fluids cleaning equipment for the second and third stage in the solids controlling system of well drilling slurry, the mud cleaners separate a lot of drill cuttings entrained by the drilling liquid returning from the well to offer convenience for the slurry to enter into the next separating device. Mud cleaner structure Mud cleaner usually consist of desander, desilter and underflow shale shaker. Desander manifold can accept one, two, or three 10”…

Read More Read More

Share
Mud cleaner
Drilling mud cleaner from Aipu solids control ?>

Drilling mud cleaner from Aipu solids control

Comments 0 Comment

Mud cleaner is a key member of drilling fluid solid control system that can efficiently remove 20~74micron cuttings from drilling fluids. It is composed of one shale shaker, one desander and on desilter. Structure of drilling mud cleaner Normally mud cleaner is a combination of desander and desilter. Desander is mounted on the top of the first mud tank together with shale shakers and vacuum degassers, while desilter is mounted together with centrifuges. Sometimes to save the top area of…

Read More Read More

Share
Mud cleaner
How to operate and maintain mud cleaner correctly? ?>

How to operate and maintain mud cleaner correctly?

Comments 0 Comment

Mud cleaner is a combination of desander, desilter and bottom shale shaker. It is applied in drilling mud solids control system in oil gas drilling exploration to separate solids from drilling mud processed by shale shaker. How to operate mud cleaner to ensure high efficiency work? The correct installation and use of multifunctional cyclone cleaner can effectively remove harmful solid from drilling fluid, control drilling fluid viscosity, recovery of useful liquid phase. And also has important significance to reduce the…

Read More Read More

Share