Desilter Archives - Page 2 of 2 - AIPU Solids Control

How does desilter work?

December 11, 2015 Comments 0 Comment

Oilfield drilling mud desilter is used after desander (or hydrocyclone desander) and as 3rd stage of solids control system, for which the solids diameter to be separated ranges from 15 to 44 microns. How does desilter work? Main part of drilling mud desilter is the hydrocyclone cone. It is a kind of pressure device. The separation process is carried out by centrifugal forces. Under pressure, drilling fluid with solid particles will flow into the mud desilter cones, after high rotation,…

How to install and maintain desilter?

November 28, 2015 Comments 0 Comment

Brief introduction for desilter Desilter is composed of screen, distribution manifold and other components. Desilter is used as the third stage solids control equipment for drilling fluid solids control system. The separation capacity of desilter is quite high and the size range of particle separated is extensive. The underflow port of hydro cyclones is like umbrella and sand can be deposited rapidly under pressure, reducing the probability of underflow port jams. Installation and debugging of desilter Desilter should be installed…

Drilling mud desilter for drilling fluids process

September 11, 2015 AIPU Comments 0 Comment

Drilling mud desilters brief information Mud desilter is the third phase solids control equipment used to purify the drilling mud. It is fit with 5″ and 4″ cones to separate 15 ~ 45 micron solids particles. According to customers’ different requirements, we can design different types of desilters. Difference including the treating capacity depending on the cones size and number. Another difference is the bottom shaker, with it or without it. If we need bottom shaker, what is the size…

AIPU Solids Control

PROFESSIONAL FOR MUD PROCESS

Browsed by
Category: Desilter