AIPU Shale Shaker on site working start last month with good feedback. The shale shaker site on tank with shaker screen drying drilling cuttings. The shaker is a 4 panels model for longer deck for better drying performance. The dryer shale shaker is design to dry drilling cuttings our of solids control shakers at a coarse shaker screen.
Main Specification of AIPU Dryer Shale Shaker
- 4 decks panel for longer deck, each panel 585x1165mm size or 700x1050mm size. The 585x1165mm size screen is replaceable with mongoose type screen.
- G force 8.0 to 8.5 to help dry drilling cuttings dryer and faster discharge. The G force is adjustable by adjusting eccentric blocks.
- Linear motion for steady working. There linear and balance elliptical type in the world, but linear motion is the most popular motion because it’s steady working.
- Electrical control panel to start or stop vibrator motors on shaker deck. Main electrical components are SIMENS, Schneider or ABB international top brands.
- Shaker screen can be sieve type screen or composite material for longer and dryer performance.
Equipments Commission On Site
- AIPU supply equipments commission service on site. The main commission will including mechanical, electrical and on site test.
- Shaker test:
- Install shaker deck, shaker skid, vibrator motors and control panels together.
- Check shaker locking and keep sure the locking is disconnected.
- Locking shaker screen on shaker deck and keep sure screen is locking tightly.
- Connect control panel to generator to get power supply.
- Press “on” on the control panel for a short while, check if everything right. Check deck vibrating and keep sure vibration motion is correct.
- Supply drilling mud or drilling cuttings onto shaker screen, adjust screen deck angle depending on performance, check shale shaker performance.