Browsed by
Tag: Desilter

Oilfield Desilter and Desilter Feeding Pump ?>

Oilfield Desilter and Desilter Feeding Pump

Comments 0 Comment

Oilfield Desilter is the third phase solids control equipments after shale shaker and desander equipments. It is made by desilter cyclone, inlet and outlet pipeline, steel frame and shale shaker for bottom drying. The defeeding pump normally choose centrifugal pump with electrical motor, pump size depending on cyclone size and quantity to make a suitable mud flow capacity. Oilfield Desilter Configuration The desilter is mainly treat drilling mud by desilter cyclone by centrifugal force. It is popularly use 4” desilter…

Read More Read More

Oilfield Desilter Options ?>

Oilfield Desilter Options

Comments 0 Comment

Oilfield desilter is the third phase cleaning equipment in the whole solids control system. AIPU Solids Control build different options of oilfield desilter with different configurations. The desilter main contains desilter cyclone, vibrating motors, pipeline frame, etc. The first phase equipment is shale shaker to separate drilling cuttings 150 microns and above, the second phase equipment is desander to separate drilling cuttings 70 microns and above, the third phase equipment is the desilter to separate drilling cuttings 20 microns and…

Read More Read More

Solids Control Desilter Options ?>

Solids Control Desilter Options

Comments 0 Comment

Desilter is the third phase drilling mud cleaning equipments for a solids control system. Like the name, desilter is designed to separate silt from drilling mud. There different design for desilter for options depending on requirement as per bellow Desilter with cyclone and frame Desilter with cyclone and frame is the economy option. It will contain cyclone, steel frame and hopper to collect solids particles. The cyclone normally 4” size and quantity depending on mud flow capacity requirement. It is…

Read More Read More

Desilter hydrocyclone On Mud Cleaner ?>

Desilter hydrocyclone On Mud Cleaner

Comments 0 Comment

Desilter hydrocyclone can be different size from 2 inch to 6 inch normally , hydrocyclone cone size and quantity can be customized depending on drilling conditions and mud flow requirement. The desilter hydrocyclone be clampt connection and stainless ball valve for easy control. It is used to provide efficient and reliable separation of solids from drilling mud in oil and gas drilling jobsite. Working Principle Of Desilter Hydrocyclone The desilter hydrocyclone separate solids by a suitable pressure offered by a…

Read More Read More

Desilter
The difference of desander and desilter ?>

The difference of desander and desilter

Comments 0 Comment

For desilter and desander. They are typical mud equipment for solids control. Brief introduction on desilter and desander Drilling mud desanders are installed on top of the mud tank following the shale shaker and the degassing machine, but before the desilter. Desander removes the abrasive solids from the drilling fluids which cannot be removed by shale shakers. Normally the solids diameter for desander to be separated would be 45~74μm, and 15~44μm for desilter. How do they work? The basic principle…

Read More Read More