Browsed by
Tag: desilter cone

Hydrocyclone separators for drilling mud process at Aipu ?>

Hydrocyclone separators for drilling mud process at Aipu

Hydrocyclone separators here are the desanders and desilters. We use them to process drilling fluid after shaker processing. Drilling mud process hydrocyclone separators Drilling mud process is the system to treat drilling fluids with cuttings. There are different equipment, from shale shaker to hydrocyclone to centrifuge. For hydrocyclones, theoretically, the separation point is 15-74microns. The particles will be separated out of drilling mud according to cones size or the diameter and feeding material specification. Before hydrocyclone separators, we use shale…

Read More Read More

Share
Oilfield Desilter and Desilter Feeding Pump ?>

Oilfield Desilter and Desilter Feeding Pump

Oilfield Desilter is the third phase solids control equipments after shale shaker and desander equipments. It is made by desilter cyclone, inlet and outlet pipeline, steel frame and shale shaker for bottom drying. The defeeding pump normally choose centrifugal pump with electrical motor, pump size depending on cyclone size and quantity to make a suitable mud flow capacity. Oilfield Desilter Configuration The desilter is mainly treat drilling mud by desilter cyclone by centrifugal force. It is popularly use 4” desilter…

Read More Read More

Share
Desilter hydrocyclone On Mud Cleaner ?>

Desilter hydrocyclone On Mud Cleaner

Desilter hydrocyclone can be different size from 2 inch to 6 inch normally , hydrocyclone cone size and quantity can be customized depending on drilling conditions and mud flow requirement. The desilter hydrocyclone be clampt connection and stainless ball valve for easy control. It is used to provide efficient and reliable separation of solids from drilling mud in oil and gas drilling jobsite. Working Principle Of Desilter Hydrocyclone The desilter hydrocyclone separate solids by a suitable pressure offered by a…

Read More Read More

Share