Knowing more details for flare ignition device ?>

Knowing more details for flare ignition device

Flare ignition device mainly is used to burn the exhausted poisonous gas from poor boy degasser in oilfield drilling. Usually, the flare ignition device is used together with the mud gas separator to light harmful gas. It can provide us more safe condition during well drilling and fire the noxious gas thus to protect the environment and human healthy.

Structure of flare ignition device

The flare ignition device has a simple structure of gas guiding pipe and high pressure ignition. It is controlled by a small control panel installed on the vertical pipe, and at the foot of this device, we design a natural gas tank to store natural gas for ignition. The potential transformer could convert the electrical pressure from 220 volt to 16000 volt. At connecting point of the flare ignition device to hoses from the drilling site, we install a backfire valve to prevent the fire get in the hose concurrently.

Notes before using flare ignition device

Pay more attention on torch to prevent any break on ignition guideline insulation. When we install torch, please consider to choose safe place with lower fire possibility. The torch base must be stable with level pedestal and use rope to assist if necessary.

The electric components should be under good condition without wet or quantity dust. Moreover, ignition device is commonly used together with poor boy degasser.

Besides the drilling site, flare ignition device also could be used in all the place where flammable and poisonous will produce. Welcome to Aipu solids control to contact with us if you are interest in flare ignition device and other solids control equipments and system, such as shale shaker, mud cleaner, desander, desilter, centrifuge, centrifugal pump, vacuum degasser, mud agitator, mud gas separator etc. Aipu solids control will provide professional solution and good service for every client.

Leave a Reply