Browsed by
Author: AIPU Solids

HDD mud reclaiming system for civil construction ?>

HDD mud reclaiming system for civil construction

HDD mud reclaiming system is also referred to HDD mud recycling system. Main equipment including shale shaker, hydrocyclone separator, pumps, mixers, tank. Mud recycling system for HDD According to the flow rate request, we mainly provide mud recycling systems below. 300LPM, 500LPM, 1000LPM, 2000LPM, and 3000LPM system, etc. The difference including tank size, shaker number, hydro cyclones number, pump size and pumps number. Some mud systems for HDD request the mixing unit, while some don’t. So, we customize a system…

Read More Read More

Share
Solids Control Shaker technical and QC details ?>

Solids Control Shaker technical and QC details

Solids control shaker is a hot product at AIPU Solids Control. Let’s find more about why it’s popular. To know better about mud shaker, we need to understand details from the produce. Shale shaker manufacture procedure We’ll issue the produce orders against the contract between AIPU and clients. On produce orders, there are details including but not limited to model number, specifications, quantity, special requirements on motors & surface colour, and so on Then according to produce orders, the technical…

Read More Read More

Share
VFD Cuttings dryer APVCD900 information for waste management ?>

VFD Cuttings dryer APVCD900 information for waste management

VFD Cuttings dryer is the cutting dryer with variable frequency/speed drive. Aipu solids control produces APVCD900 and APVCD700 vertical cutting dryer. APVCD900 cuttings dryer specification Model 900 vertical cutting dryer is holding 930mm diameter of the screen basket. The treating capacity is 30-50T/h, speed is 900rpm. The opening of the screen is 250-500microns. G force is over 420G. Main motor and oil pump motor power is 75HP and 0.75HP. Overall dimension is about 112”x79”x80″ and weight is about 4450kg We…

Read More Read More

Share
Linear motion shakers Hunter-D4 delivery ?>

Linear motion shakers Hunter-D4 delivery

Linear motion shakers is the 3rd generation shale shaker nominally. Nowadays, linear motion shaker is still popular with major clients. Linear vibration mode occupies an important and the majority of shaker mode. Hunter-D4 shale shaker specifications This model of shaker is developed and made by AIPU Solids control. Screen panel for this shaker is frame type. We can make them a steel frame panel or the composite frame panel. Single screen area is about 8ft². 4 panels of screen provides…

Read More Read More

Share
Mud sediment solutions during well drilling and after ?>

Mud sediment solutions during well drilling and after

Drilling fluids including different types. Such as water base, oil base and the polymer material drilling fluids. During well drilling, oil base mud is easy to deposit and become sediment or cakes. Why there is sediment of drilling mud during well drilling We know the oil base fluids hold higher density and viscosity. And during our operation, we need to add some material for better drilling efficiency. This may enhance mud gravity or viscosity. Furthermore, some drilling cuttings if not…

Read More Read More

Share