Browsed by
Tag: Drilling mud desander

Hydrocyclone desander used in drilling mud system ?>

Hydrocyclone desander used in drilling mud system

Hydrocyclone desander for drilling mud Hydrocyclone is also called cyclone separator. Desander and desilter are drilling rig equipments with a set of hydrocyclones that separate sand and silt from the drilling fluid. Desander is installed after shale shakers and before desilter. Desander removes those abrasive solids from the drilling mud which cannot be removed by shakers. Desander with 10 hydrocyclones are able to remove roughly 50 percent of those solids within the 40-50 micron range at a flow rate of…

Read More Read More

Drilling mud desanders from Aipu solids control ?>

Drilling mud desanders from Aipu solids control

Drilling mud Desanders   are the second stage processing equipment in the solids control system. Desander hydrocyclone separate 47-76 μ m particles from drilling fluids. We commonly use 8″, 10”, or 12″cyclones combined desander. According to the clients’ demands of the treating capacity, we can configure desande with different numbers of hydrocyclone. Drilling mud desanders application Desander can purify drilling mud for different drillings or slurry process. Also remove well water sand, industrial concentration, solid-liquid separation, liquid gas and liquid…

Read More Read More

Drilling mud desander from Aipu solids control ?>

Drilling mud desander from Aipu solids control

Desander is the second phase solids control equipment in the drilling mud system. It is mainly used to separate 46-76 μ m particles in drilling fluid. According to the clients’ demand of the treating  capacity, the desander can be configured with different numbers of hydrocyclone. Desander cones including 6”, 8”, 10”, and 12”. Most desander equipment are fit with 10” cones. Drilling mud desander working principle The desander is made of high anti-corrosive polyurethane or hi-chromium, affordable, high temperature resistant….

Read More Read More