Browsed by
Tag: Drilling fluids desander

The principle and feature of drilling mud desander ?>

The principle and feature of drilling mud desander

Drilling mud desander is the second phase mud processing equipment. A desander is a device that removes large drilling solids from the whole mud system. It should be located behind the shale shakers and vacuum mud degassers and before the desilters or mud cleaners. Principle of drilling mud desander The hydrocyclone drilling mud desander is operated in accordance with the principle of centrifugal separation. Hydrocyclone is made of an upper cylindrical section and a lower conical section. A vortex finder…

Read More Read More

How to prolong drilling fluids desander lifespan? ?>

How to prolong drilling fluids desander lifespan?

People buying drilling fluids desander is in order to remove heavy ash particles. Long-term operation definitely leaves a desander worn or damaged or even useless. Therefore, to maintain desanders is very vital, which can increases their service life as well as reduce energy consumption. Repair or replace damaged parts immediately During the operation, the drilling fluids desanders need to be maintained. Usually, some parts of desanders are easy to wear off, such as upper cone-shaped canister and the swirl’s body…

Read More Read More

Do you know desander working principle? ?>

Do you know desander working principle?

The mud desander is a kind of drilling equipment that is able to extract foreign solids from gas, water or the current of the waste water. When we use desander, it is necessary to how to operate it in a proper way. And how to use desander in a suitable way is also important to promote the quality and service life of the desander. Firstly, Let’s know desander working principle. Once you understand desander working principle clearly, the operate methods…

Read More Read More

Hydrocyclone desander used in drilling mud system ?>

Hydrocyclone desander used in drilling mud system

Hydrocyclone desander for drilling mud Hydrocyclone is also called cyclone separator. Desander and desilter are drilling rig equipments with a set of hydrocyclones that separate sand and silt from the drilling fluid. Desander is installed after shale shakers and before desilter. Desander removes those abrasive solids from the drilling mud which cannot be removed by shakers. Desander with 10 hydrocyclones are able to remove roughly 50 percent of those solids within the 40-50 micron range at a flow rate of…

Read More Read More

Drilling mud desander from Aipu solids control ?>

Drilling mud desander from Aipu solids control

Desander is the second stage processing equipment in the solids control system. It is mainly used to separate 47-76 μ m particles from drilling fluids. We commonly use 8″, 10”, or 12″cyclones combined desander. According to the clients’ demands of the treating capacity, desander can be configured with different numbers of hydrocyclone. The drilling mud desander application Desander is mainly used to purify and control in raw water, such as oil drilling, CBM drilling mud purification separation, well water sand…

Read More Read More